TDSScreenCap – An RS232 screen capture program for the Tektronix TDS3000 series

I whipped up this little utility a while back as a quick and easy way to get screen captures from the TDS3000 series’s serial port.

TDS3000 Screen capture
TDS3000 Screen capture

Download it here.

8 thoughts on “TDSScreenCap – An RS232 screen capture program for the Tektronix TDS3000 series”

  1. I’ve tried this utility for my TDS340A. Serial dialog works but at the end of receiving PC stops with “no valid image received”. What’s wrong?

    1. The problem is that is written for the TDS3000 series.

      Assuming the TDS300 even supports screen grabs, I do not have one to experiment with.

  2. Thanks very much, works really well. Others note that you have to set the System I/O values to RS232, 38400 Baud, Flagging – None, EOL – LF for this to work.

    You can use Alt Print Screen to capture the whole window into the Clip Board, or use something like Snaggit or 5 clicks to copy just the TDS Screen part.

    Pleased 🙂

Leave a Reply to Rich Osman Cancel reply

Your email address will not be published. Required fields are marked *